How to add a floating effect to your address sign?

By following these easy steps, you can add a floating effect to your new address sign that will make it look modern and visually appealing.

Requirements:

1. Drill tool.
2. Standoffs or spacers. You can easily find them at your local hardware store or order from Amazon. The main difference between a spacer and a standoff is that standoffs are also threaded at each end, while spacers typically are not.
3. Level. A level is essential to ensure that your sign is mounted straight and level.
4. Tape measure: Use a tape measure to ensure accurate placement of the sign on the wall.
5. Screwdriver.
6. Pencil or marker to mark the location of the mounting holes on the wall.

Steps to follow:

1. Determine where you want to mount your metal address signs and mark the location of the mounting holes.
2. Drill the holes in the wall or surface where you want to mount the sign.
3. Install the standoffs or spacers into the drilled holes.
4. Insert screws through the holes in the sign and into the standoffs or spacers.
5. Tighten the screws until the sign is securely mounted to the wall, but do not overtighten, as this can damage the sign or the standoffs/spacers.